| Specifications︰ | Product Technical Specifications:
1. Standards Referred: IS:4984-1995, ISO-4427, DIN-8074 and ASTM F-714
2. Product Range
· Outer Diameter: 16 to 710 mm
· Pressure Class: 2.5 to 16 kg/cm² or SDR 33 to 7.4
· HDPE Material Grades: PE-63, PE-80, PE-100 |
| Advantages︰ | ‘HASTI’ HDPE Pipes are manufactured from HDPE virgin raw material, which is non-toxic and does not support microbial growth, complying with IS:10141-1982. The excellent overall migration characteristics make it ideally suitable for potable water supply applications. These pipes are strong enough to withstand the burial depths, earth and traffic loads, with no buckling. These pipes can also withstand the surge pressures resulting from water hammer. Usually, these pipes have a design life 50 years. The unit cost of water delivered over the operational years is minimum in HDPE Pipes compared to other piping material. ‘HASTI’ HDPE Pipes are well accepted for water supply in following areas:
· Raw/Filtered water rising/gravity mains with water distribution.
· Demineralized water lines.
· Lift Irrigation and Siphon Irrigation.
· Cooling/Chilled water circulation lines.
· Temporary construction water lines schemes for draught relief and flood relief.
· Agriculture applications like farm irrigation under ground as well as above ground piping network, sprinkler systems and drip systems. |
|
|
|
